- Presses for metal, wood, plastic, rubber, leather and glass
- Filter presses
- Chamfering and bending machines
- Injection moulding machines
- Machining centres and welding presses
- Automatic placement machines
- Robots
- Palleting machines
Properties
Properties
Properties
- Presses for metal, wood, plastic, rubber, leather and glass
- Filter presses
- Chamfering and bending machines
- Injection moulding machines
- Machining centres and welding presses
- Automatic placement machines
- Robots
- Palleting machines
Properties
Prevention of bodily injuries of fingers, hands, and limbs, e.g. when working at:
- wood working machines
- packaging machines
- textile machines
- storing and materials-handling technology
- insertion machines
- revolving machines
- palletizers
Properties integrated control-unit with contactor control and restart activatable by DIP switches activatablecontactor/valves directly connectablly, switching capacity 0,5A/24Vsmallest safety distances by short response times 6 ms to 25 ms, depending of the protection highsmallest obstacle recognition of 14mm up to 7m rangehand protection up to detection range of 24 m, recognition of smallest obstacles(30 mm)protection heights of 100mm to 1900mmmicroprocessor monitoring of the safety functionsself-monitoring semiconductor outputs with line interruption monitoring, short-circuit- and side current passages check.built in selfdiagnostic with error displayminimum safety distance due to short response times, between 5 ms and 25 ms, depending on constructional lenghtprotective system IP65
Areas of application:
- Wood processing machines
- packaging machines
- Textile machine
- storing and materials-handling technology
- Automatic placement machines
- revolving machines
- Palleting machines
Properties Integrated control-unit with contactor control and restart can be programmed without a PCContactor/valves directly connectablly, switching capacity 0,5A/24VSmallest safety distances by short response times 4 ms to 29 ms, depending of the protection highFinger and hand protection with up to 5m protective width(resolution 14 mm and 30 mm)Protection heights from 100mm to 1500 mm in steps of 100 mmMicrocontroller monitoring of the safety functions (self-monitored)Semiconductor outputs with short-circuit and crossconnection monitoringIntegrated self-diagnosis with a fault indication by 7-digit displayOptional safety switchgears permit muting and clocked operationDirect connection via M12 connectorCompact design 25 x 35 mm w/ flexible fastening by tenon blocks and protection category IP 65
The safety light curtains ILVT are electrosensitive protective devices
- blanking of obstacles with reliable safety
- 11 blanking features easy to program
- integrated switching unit: contactor control and restart interlock
- extremely short reaction times
- protective field up to 1,9 m high, range 20 m
- Wood processing machines
- packaging machines
- Textile machine
- storing and materials-handling technology
- Automatic placement machines
- revolving machines
- Palleting machines
Properties
– direct on-site wiring
Short cabling distances
Reduced installation costs
Saved space in the switch cabinet
Integrated muting lamp
– direct connection of safety components
Elimination of the need for safety switchgear for emergency stop, safety door switching, two-hand control desk or cycle control systems
– minimal parameterization work
No software required
Short commissioning times
Faster exchange in case of a fault
Properties
- Muting sensors / Muting lamp / Start button directly connectable
- 1 – 4 cycle control
- programming of blanking functions
- restart interlock / valve control
- provides Muting function
- 2 external Muting lamp connectable
- snap-on controller for the light curtain / light grid
- LCD display for easy diagnosis and programming
- small design
Properties
- Flexible Hard- and Software concept
- Available with a safe bus system or/and two counter inputs
- Reduction of expenditures in Mounting and Installation
- Easy programmable
- Software modules tested and certificated
- Safety category 4 according to EN 954-1, SIL 3 according to IEC 61508
- PL a through PL e according to prEN 13849-1
- Compact Safety SPS
- minimum response time
1) Warning field 2) Protective field
Properties
- integrated external device monitoring (EDM)
- integrated restart interlock/restart interlock delay
- status display with LEDs and 7
- minimum response time 60 ms
- configuration using PC or notebook
- configuration memory in the system plug.
- increased resilience to external light and dust
- Protective field <= 4m Radius, optionally<= 7m
- Warning field <= 49m Radius
- Detection is dependent on the reflectivity
- 190° scanning angle
- the contour of the protective field can be monitored
The foot pedal FE-FS1-U1-U is equipped with a switching element, which contains one NC and one NO contact. It may e.g. be used for the selection of AKAS® Box bending function or opening of a press.
Safety Contact Mats are used for safeguarding areas of danger on machines and plants with the aim of preventing unchecked access. The switching mat can be individually adapted to the area which has to be secured. With the help of the closed-circuit-principle a constant monitoring of the safety contact edge is insured.
Contact mats are used on…
- machines, plants and robotic systems where the areas of danger are unchecked accessed
- plants where the presence of a person at a certain position is necessary
- elevators, in order to prevent the unallowed entering of the elevator roof
- building entrances